The JOHNFORD ST series SUPER TURNING centers are exclusively designed to not only meet today's needs, but also future requirements. These turning centers give you the very finest in turning technology. Rugged construction assures optimum rigidity and stability for years of reliable, trouble free operation. These machines offer turning accuracy and efficiency that are far beyond ordinary.
| ITEM \ MODEL | ST- 80B |
ST- 100B |
ST- 130B |
ST- 160B |
ST- 200B |
ST- 240B |
ST- 80C |
ST- 100C |
ST- 130C |
ST- 160C |
ST- 200C |
ST- 240C |
|
| Swing over bed (mm) | 920 (36.2") | ||||||||||||
| Swing over cross slide (mm ) | 700 (27.6") | ||||||||||||
| Chuck size (mm) | 381 (15") (Std.) 450 (17.7") (Opt.) |
510 (20.1") (Std.) 610 (24") (Opt.) |
|||||||||||
| Bar capacity (mm) | 116 (4.6") | 139 (5.5") | |||||||||||
| Spindle nose | A2-11 | A2-15 | |||||||||||
| Spindle bore (mm) | 132.5 (5.2") | 152 (6") | |||||||||||
| Spindle speed, step(s) | Auto 4 speeds | ||||||||||||
| Spindle speed range (rpm) | 2000 | 1500 (Std.) 1400 (Opt.) |
|||||||||||
| Spindle motor(kw) (30 min / con.) |
22 / 26 (Std.) 30 / 37 (Opt.) |
30 / 37 (Std.) 37 / 45 (Opt.) |
|||||||||||
| Spindle bearing diameter (mm) | 180 (7.1") | 200 (7.9") | |||||||||||
| No. of tools | 12 | ||||||||||||
| Cross travel (X-axis) (mm) |
370 (14.6") | ||||||||||||
| Y-axis travel (Opt.) (mm) | ±75 (3") | ||||||||||||
| Longitudinal travel (Z-axis) (mm) |
2000 (78.7") |
2400 (94.5") |
3050 (120.1") |
4050 (159.4") |
5050 (198.8") |
6050 (238.2") |
2000 (78.7") |
2400 (94.5") |
3050 (120.1") |
4050 (159.4") |
5050 (198.8") |
6050 (238.2") |
|
| Rapid traverse (m / min) |
X: 10 Y: 10 Z: 12 | ||||||||||||
| Tailstock travel (mm) | 1700 (66.9") |
2100 (82.7") |
2800 (110.2") |
3750 (147.6") |
4750 (187") |
5750 (226.4") |
1700 (66.9") |
2100 (82.7") |
2800 (110.2") |
3750 (147.6") |
4750 (187") |
5750 (226.4") |
|
| Tailstock quill travel (mm) | 150 (5.9") | ||||||||||||
| Tailstock quill diameter (mm) | Ø200 (7.9") | ||||||||||||
| Tailstock spindle taper | MT#7 | ||||||||||||
| Servo motor (X-axis) (kw) |
7 | ||||||||||||
| Servo motor (Y-axis) (Opt.) (kw) |
3 | ||||||||||||
| Servo motor (Z-axis) (kw) |
7 | ||||||||||||
| Bed inclination | 60° | ||||||||||||
| Weight (kg) | 15000 (33000) |
16500 (36300) |
20100 (44220) |
24100 (53020) |
28100 (61820) |
32100 (70620) |
15300 (33660) |
16800 (36960) |
20300 (44660) |
24200 (53240) |
28200 (62040) |
32200 (70840) |
|
| Machine dimensions (mm) |
W x H | 2460x2870 (96.9" x 113") | |||||||||||
| L | 6852 / 7252 / 8052 / 9450 / 10450 / 11450 (269.8" / 285.5" / 317" / 372" / 411.4" / 450.8") | ||||||||||||
| ITEM \ MODEL | ST- 80D |
ST- 100D |
ST- 130D |
ST- 160D |
ST- 200D |
ST- 240D |
|
| Swing over bed (mm) | 920 (36.2") | ||||||
| Swing over cross slide (mm ) | 700 (27.6") | ||||||
| Chuck size (mm) | 510 (20.1") (Std.) 610 (24") (Opt.) |
||||||
| Bar capacity (mm) | 165 (6.5") | ||||||
| Spindle nose | A2-15 | ||||||
| Spindle bore (mm) | 185 (7.3") | ||||||
| Spindle speed, step(s) | Auto 4 speeds | ||||||
| Spindle speed range (rpm) | 1000 | ||||||
| Spindle motor(kw) (30 min / con.) |
30 / 37 (Std.) 37 / 45 (Opt.) |
||||||
| Spindle bearing diameter (mm) | 240 (9.4") | ||||||
| No. of tools | 12 | ||||||
| Cross travel (X-axis) (mm) |
370 (14.6") | ||||||
| Y-axis travel (Opt.) (mm) | ±75 (3") | ||||||
| Longitudinal travel (Z-axis) (mm) |
2000 (78.7") |
2400 (94.5") |
3050 (120.1") |
4050 (159.4") |
5050 (198.8") |
6050 (238.2") |
|
| Rapid traverse (m / min) |
X: 10 Y: 10 Z: 12 | ||||||
| Tailstock travel (mm) | 1700 (66.9") |
2100 (82.7") |
2800 (110.2") |
3750 (147.6") |
4750 (187") |
5750 (226.4") |
|
| Tailstock quill travel (mm) | 150 (5.9") | ||||||
| Tailstock quill diameter (mm) | Ø200 (7.9") | ||||||
| Tailstock spindle taper | MT#7 | ||||||
| Servo motor (X-axis) (kw) |
7 | ||||||
| Servo motor (Y-axis) (Opt.) (kw) |
3 | ||||||
| Servo motor (Z-axis) (kw) |
7 | ||||||
| Bed inclination | 60° | ||||||
| Weight (kg) | 15500 (34100) |
17000 (37400) |
20500 (45100) |
24500 (53900) |
28500 (62700) |
32500 (71500) |
|
| Machine dimensions (mm) |
W x H | 2460x2870 (96.9" x 113") | |||||
| L | 6852 / 7252 / 8052 / 9450 / 10450 / 11450 (269.8" / 285.5" / 317" / 372" / 411.4" / 450.8") | ||||||
• All data subject to change without notice
• All the specifications are listed with the FANUC CNC system and 12-angle turret.
| STANDARD ACCESSORIES | OPTIONAL ACCESSORIES |
|
|